| Bruce
Flannagin |
| Hartselle,
AL |
| 1986
GMC Truck |
| Vehicle Year/ Make/ Model: |
1986 GMC Truck |
| Original Cost of Vehicle? |
$5,500.00 |
| Cost to Build Vehicle? |
$25, 000.00 |
| Why did you build your Ride? |
This was always my favorite
body style. |
| How Long to Build your Ride? |
1 year approximately |
| How Long Have You Been in
the Sport? |
Approximately 17 Years |
| Previous Rides: |
1991 Isuzu Pup |
| What would you like to build
next? |
Street Rod |
| Engine |
| Make: GMC |
|
| Year: 1986 |
|
| # of Cylinders: 8 cylinders |
|
| Engine Modifications: Built
350 4 Bolt Main |
|
| Any Chrome or Polish? Valve
Covers, Breather, Timing Chain |
|
| Engine Builder/ Shop: Merimans
Garage in Hartselle, AL |
|
|
| Driveline |
| Clutch
& Flywheel: Automatic |
|
| Torque
Converter (Stall Converter)
2500#’s of torque |
|
| Transmission Builder/ Shop:
Merimans Garage in Hartselle,
AL |
|
| Chassis |
| Stock or Custom? Custom |
|
| Mods to the Frame: From the
middle of the cab to the rear
of the truck, they built a tube
frame which is C-notched. The
engine was raised for clearance.
The bed was raised and gas tank
is reinstalled in the Bed. C-
Notch done in front with stock
frame. The fender wells and etc.
were removed to allow for drop. |
| |
|
| Inches of lift or drop? Please
specify! With the airbags the
truck sits on the ground-literally. |
|
| Who did the Mods to the Frame?
The Hot rod Shop in Dayton, OH |
|
| Front Shocks: Stock |
|
| Rear Shocks: Stock |
|
| Spindles: Stock |
|
| 4-Link: 4-Link in the rear |
|
| Compressor
model and Brand: ¼ Horsepower
with 5 gallon tank. |
|
| Number of Valves and Size:
2 |
|
| Air Bag Size/ Model; Front
and Rear: 2600 # Firestone on
the front and rear |
|
| Other Chassis Mods: |
|
| Any Chrome, Polish or Paint: |
|
|
| Wheels and Tires |
| Front Wheel Type: Boss |
| Size:
22” |
| Tire Size: 265/35R/22 |
|
| Rear Wheel Type: Boss |
| Size:
22” |
| Tire Size: 265/35R/22 |
|
| Paint |
| Paint
Color: Sonic Blue |
|
| Type
of Paint: Dupont |
|
| Describe
Graphics, including paint colors
and types: The truck was taken
apart for the paint. |
|
| Painted
By: Stringers Paint and Body
Shop in Hartselle, AL |
|
| Graphics
By: N/A |
|
|
| Body |
| Chopped:
Center Floor |
|
| Body
Drop: Stock with 2.0” raised
in center. |
|
| Hood:
Stock |
|
| Grille:
Billet |
|
| Bumpers:
Chrome in Front |
|
| Add
On Accessories: Billet Side
Mirrors |
|
| Body
Mods: Custom built rollpan,
filled gas tank, filled the
third brake light, relocated
the tag, shaved side markers,
removed and filled wipers. |
|
|
| Under Body Mods By: Jake Burton at Hitek Hot Rods in Dayton, OH |
|
|
| Interior |
| Dashboard:
Custom Leather |
|
| Gauges:
Aftermarket- oil, temp and
water |
|
| Steering
Wheel: Billet |
|
| Amps:
Coming in future |
|
| Video
System: Future plans |
|
| Shifter:
Stock |
|
| Seats
: Tweed and Leather custom
bench. |
|
| Window
Tint %: 35% Doors and Limo
Tint on the back |
|
| Trunk
/ Bed : |
|
| Describe
Upholstery Material/ Color
Scheme: Grey leather and grey
tweed with custom stainless
steel. |
|
| Any
Other Interior Mods: Billet
rearview mirror, Billet GMC
door sill plates. |
|
| Upholstered
By: Troy at Shades Glass Tinting
in Decatur, AL |
|
:::::: Gauge Network :::::::